site logo
  • Call Us
  • +86-18038269529
  • Our Address
  • Gate No.24 Modern Industrial Area, Jiaoyu Road, Shipai town, Dongguan City, Guangdong Province, China-523330.

Introduction of spring making machine maintenance work

The spring making machine is a very common machine, but many people do not understand the maintenance work of the spring making machine, and do not know how to properly maintain the spring making machine.

The maintenance work of the spring making machine is mainly: cleaning, tightening, adjustment, lubrication, and anti-corrosion. In order to reduce the wear rate of spring mechanical parts, eliminate long-term hidden troubles, and prolong the service life of the machine, the following work needs to be done:

1. Routine maintenance

Routine maintenance focuses on cleaning, tightening, adjustment, and lubrication. Routine maintenance of the spring making machine must be carried out as required before, during and after the machine is running. This task is performed independently by the spring machinery operator.

2. Regular maintenance

According to the maintenance requirements of mechanical equipment, after reaching the specified working hours or specified mileage, corresponding regular maintenance must be carried out, including the following three items: The first-level maintenance is carried out on the basis of routine maintenance, and the key work is to release After lubricating, tightening and checking that all relevant parts have been cleaned and the three filters are working. Mainly guided by the mechanical team leader and completed by the mechanical operator. The secondary maintenance mainly focuses on inspection and adjustment. Specifically, check the working conditions of the spring-feeding heat treatment part, the spring-strapping machine part and the lubrication system and make necessary adjustments to eliminate the faults found. Ensure that the spring making machine has good working performance.

Contact Us

24 hours online service