wire feeding accuracy / length In terms of power source, the mechanical spring machine's wire feeding power uses ordinary three-phase/single-phase motors, which are characterized by uncontrolled angles.

electromagnetic clutch / one-way clutch Due to the structure of the mechanical spring machine, it is necessary to install a brake device to ensure that the clutch is stopped immediately, that is, the wire feeding operation is stopped, but it cannot accurately achieve this and the accuracy is lowered, and the clutch is often the damage of the machine. 3, the wire feeding and forming power are from the same motor In the wire feeding process, the forming cam is also continuously operated to form a cutting operation, so that the wire feeding length is also limited, and the production of a long spring of a special specification cannot be realized. Due to the simple structure of the mechanical spring machine and the poor signal processing capability, it is impossible to make corresponding actions after the problems such as the rack and the wire are in the production. Therefore, the numerical control spring machine and the computer spring machine have made up for the shortage of the machine, and Good production of high precision spring products.